An architecturally appealing concealed fastener panel installed with a floating clip system, which allows for expansion and contraction of panel
| |
Common widths for panels with 1" high rib:
- 12-7/8" wide x 1" high
- 16-7/8" wide x 1" high
Common widths for panels with 1-1/2" high rib:
- 11-3/8" wide x 1-1/2" high
- 15-3/8" wide x 1-1/2" high
|
Panels can be produced flat or with striations. Bridger Steel recommends striations to minimize oil canning. Backer rod may be applied under flat panel application to help minimize oil canning (oil canning is not a cause for rejection).
Save money with Bridger Steel’s 26 gauge standard colors with lifetime film integrity and 40 year chalk and fade warranty. Coated with the highest quality and most advanced Ceramic Impregnated Silicon Modified Polyester (CSMP) paint system available.
Many custom colors and KYNAR paint systems available in 26, 24 and 22 gauge. Please refer to color chart for more information.
Bridger Steel specializes in architecturally appealing, unique profiles in various types of metals including, but not limited to, our rustic materials TRUETEN™ (A606 & 1008), Galvanized, Galvalume®, Bonderized, Copper, ReziBond®, RHEINZINK® and other custom metals. Custom trim and accessories available for all profiles. Local and nationwide delivery available on Bridger Steel Trucks.
-
Available with 1" and 1-1/2" rib heights
-
Custom widths available between 9" and 20" (exclusive to Bridger Steel)
-
Panels produced in lengths from 3' to 100'+
-
Bridger Steel recommends installing this panel over a solid substrate
-
Recommended minimum roof pitch for panels with 1" & 1-1/2" rib height is 3:12
-
Wind rated at 130 miles per hour
-
Panels can be manufactured at job site to greatly reduce the risk of damage during transportation
-
Protective film can be applied to panels for added protection at customer’s request or at Bridger Steel’s recommendation
An architecturally appealing concealed fastener panel installed with a floating clip system, which allows for expansion and contraction of panel
| |
Common widths for panels with 1" high rib:
- 12-7/8" wide x 1" high
- 16-7/8" wide x 1" high
Common widths for panels with 1-1/2" high rib:
- 11-3/8" wide x 1-1/2" high
- 15-3/8" wide x 1-1/2" high
|
Panels can be produced flat or with striations. Bridger Steel recommends striations to minimize oil canning. Backer rod may be applied under flat panel application to help minimize oil canning (oil canning is not a cause for rejection).
Save money with Bridger Steel’s 26 gauge standard colors with lifetime film integrity and 40 year chalk and fade warranty. Coated with the highest quality and most advanced Ceramic Impregnated Silicon Modified Polyester (CSMP) paint system available.
Many custom colors and KYNAR paint systems available in 26, 24 and 22 gauge. Please refer to color chart for more information.
Bridger Steel specializes in architecturally appealing, unique profiles in various types of metals including, but not limited to, our rustic materials TRUETEN™ (A606 & 1008), Galvanized, Galvalume®, Bonderized, Copper, ReziBond®, RHEINZINK® and other custom metals. Custom trim and accessories available for all profiles. Local and nationwide delivery available on Bridger Steel Trucks.
-
Available with 1" and 1-1/2" rib heights
-
Custom widths available between 9" and 20" (exclusive to Bridger Steel)
-
Panels produced in lengths from 3' to 100'+
-
Bridger Steel recommends installing this panel over a solid substrate
-
Recommended minimum roof pitch for panels with 1" & 1-1/2" rib height is 3:12
-
Wind rated at 130 miles per hour
-
Panels can be manufactured at job site to greatly reduce the risk of damage during transportation
-
Protective film can be applied to panels for added protection at customer’s request or at Bridger Steel’s recommendation