<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=355496108177960&amp;ev=PageView&amp;noscript=1">

Flush Soffit

Product Shown: Metal Soffit with V Stiffener

Flush Soffit creates clean lines with little interruption. Flush Soffit is traditionally used to finish out the eaves of a roof and as part of a roof venting system with a ridge cap. However, interior designers, builders and architects have been drawn to the low profile minimalist lines of this panel and have begun to use them for everything from ceiling panels, to wall coverings, to wainscots. With a large selection of colors and finishes, Flush Soffit can match almost any project.

Panel Colors

22 Gauge Colors
24 Gauge Colors
26 Gauge Colors

Panel Profile

flush_panel_profile.png

Product Applications

Metal Soffit, Interior and Accent

Suitable for regions prone to extreme temperatures.
Suitable for exterior siding or interior liner panels.
Available in Cool Roof certified colors.
Suitable for Rainwater Harvesting.
Must be installed over a solid substrate.
Single rib overlap is used for siding.

Protective film can be applied to panels for added protection.
This panel can be field formed at the job site.
A quality high temperature, ice and water underlayment on all roofing applications is recommended.

Get a Quote
Product Details
Recommended Environments
  • High Temperature (Select Colors)
  • Interior Accent Panels
Finished Coverage
  • 12"
  • 16"
Profile Variations
  • Flat
  • 1 or 2 V Stiffeners
  • Perforated
  • Perforated with 1 V-Stiffeners
  • 0-1" Reveal with any above option

 

Panel Gauges
  • 22 Ga. (Available Upon Request)
  • 24 Ga.
  • 26 Ga. 

What are Gauges?

Fastener Options
  • Concealed Fastener

View Recommended Fasteners

Panel Length
  • 3' to 30'
Panel Height
  • 7/8"
Paint Warranty Available
  • Yes

Click to see if Flush Soffit is right for your project

Get a Free Quote

Have a question? Ask an Expert